It provides loads of customizable options and is very easy to use. The best option is Cooler Master’s controller software which is specifically designed for this cooler. If you’re looking to remove your AMD Wraith Prism cooler, perhaps to change the thermal paste, you can read our guide on how to remove the cooler.

Plugging in the USB Type-2 End of the Cable into the motherboard- Image Credits (TechHut) Connect the other end of the cable to any one of the USB Type-2 ports on your motherboard. Now you can connect the 3-pin USB header into the cooler.

You need to start by plugging the USB cable into the cooler and removing the RGB cable from the cooler in case it is plugged in.įirst, you’ll need to remove the rubber coverings on the USB port on the cooler. Now, let’s see how to control the RGB on the Wraith Prism Coolers. Therefore, you need to use only the USB cable. You can’t use both cables simultaneously because, in this case, it will default to the RGB cable and will not allow you to control all the lights on your cooler. The 12 volt RGB cable will only allow you to control the fan’s RGB, while the USB cable will allow you to control all three RGB lights. Three different RGB lights can be controlled on the cooler: the AMD logo, the fan, and the ring. You need to know that it is necessary to connect one of the RGB or the USB Type-2 cables provided with the coolers to control the RGB of the cooler. Changing AMD Wraith Prism RGB On Linux And Mac.

Cooler Master AMD Wraith Prism Software.

Changing AMD Wraith Prism RGB On Windows.

Amd prism rgb control